General tools

Filter
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
2 From 5
No results were found for the filter!
Round knife
Round knife
Round knife Round knife made of stainless steel with excellent sharpness and edge retention. Especially suitable for thicker leathers (vegetable tanned leather, belt shoulders, water buffalo croupons, etc.). Can also be used for skiving...
Content 1 piece
€139.90 *
Craft Japan Blades for Swivel Knife
Craft Japan Blades for Swivel Knife
Craft Japan Standard Blades for Swivel Knife (price per piece) These blades are suitable for our swivel knife, ergonomic swivel knife and swivel knife sets with a shank size of 5.5 mm . (Not suitable for Barry King swivel knives.) For...
Content 1 piece
From €9.50 *
Details
Craft Japan Ceramic Blade for Swivel Knife
Craft Japan Ceramic Blade for Swivel Knife
Craft Japan Ceramic Blade for Swivel Knife (price per piece) Re-sharpening of the blade is eliminated. Permanent sharpness and edge retention for exact cuts. These blades are suitable for our swivel knife, ergonomic - swivel knife and...
Content 1 piece
€49.95 *
Details
Detail - Locheisen (Nadel)
Detail - Locheisen (Nadel)
Detail - Punch Punch - round cross-section with Ø 0.3 mm . Tool for punching very fine holes or for marking seam lines on leather. This punch works similar to an awl, no material is punched out but displaced. Please be sure to use a...
Content 1 piece
€16.20 *
Detail - Locheisen (0,5 mm)
Detail - Locheisen (0,5 mm)
Detail - Punch Punch - round cross-section with Ø 0,5 mm . Tool for punching very fine holes. Due to the small wall thickness of the punch, a very precise punching is possible. Please use a suitable hammer (not a steel hammer) and a...
Content 1 piece
€15.10 *
Craft Japan Hole Punches Ø 0.6 - 30 mm
Craft Japan Hole Punches Ø 0.6 - 30 mm
Craft Japan Hole Punches Ø 0,6 - 30 mm High-quality, polished hole punches for leather or similar materials. Please use a hard base and a suitable hammer (no metal hammer, risk of splintering) see accessories. Available options: No. 2 =...
Content 1 piece
From €11.95 *
Details
Craft Japan Oval – Hole Punch
Craft Japan Oval – Hole Punch
Craft Japan Oval Punches For punching oval holes in leather or similar materials. Please use a suitable base for punching, e.g. hard rubber or hardwood board and use a wood or nylon head tooling hammer, see accessories. Available...
Content 1 piece
€26.30 *
Details
Hint!
Craft Japan Tooling Stamps "Starter - Set"
Craft Japan Tooling Stamps "Starter - Set"
12-piece set consisting of: polyhammer, swivel knife, modeling tool and 7 different tooling stamps. Basic equipment for tooling and carving leather. A variety of tooling stamps allow you to tool and carve many shapes and patterns. - Let...
Content 1 set
€119.00 * €131.25 *
Design Corners/Edges Template Stencil
Design Corners/Edges Template Stencil
Transparent, 3 mm thick acrylic template stencil for marking or cutting 9 different design corners/edges. Dimensions : Length: 160 mm Width: 110 mm Thickness: 3 mm
Content 1 piece
€26.40 *
Round Strap Ends Template Stencil
Round Strap Ends Template Stencil
Transparent, 3 mm thick acrylic stencil for marking or cutting round strap ends. Suitable for straps with the following widths: - 12.70 mm (1/2") - 15.86 mm (5/8") - 19.10 mm (3/4") - 25.40 mm (1") - 31.75 mm (1 1/4") - 38.10 mm (1 1/2")...
Content 1 piece
€15.00 *
Round Corners Template Stencil
Round Corners Template Stencil
Transparent, 3 mm thick acrylic stencil for marking or cutting round corners. Subsequent inner and outer radii are shown on the template: - 5.0 mm - 6.0 mm - 7.5 mm - 10.0 mm - 12.5 mm - 15.0 mm Dimensions : Length: 93 mm Width: 93 mm...
Content 1 piece
€13.20 *
Strap Ends Template Stencil
Strap Ends Template Stencil
Transparent, 3 mm thick acrylic stencil for marking or cutting English point and round strap ends and for marking belt holes. Suitable for belts with the following widths: - 25,40 mm (1") - 31,75 mm (1 1/4") - 38,10 mm (1 1/2") - 44.45...
Content 1 piece
€28.20 *
English Point Strap Ends Template Stencil
English Point Strap Ends Template Stencil
Transparent, 3 mm thick acrylic stencil for marking or cutting of English point strap ends. Suitable for straps with the following widths: - 12.70 mm (1/2") - 15.86 mm (5/8") - 19.10 mm (3/4") - 25.40 mm (1") - 31.75 mm (1 1/4") - 38.10...
Content 1 piece
€18.40 *
Leather Splitter (Mini)
Leather Splitter (Mini)
Leather Splitter (Mini) Solid construction made of cast iron, weight approx. 2.5 kg, max. splitting width of the leather is 145 mm. Ideal for splitting belts or straps. With 12.5 x 15.5 cm, our leather splitter machine (mini) requires...
Content 1 piece
€299.00 *
Hint!
Lederarbeiten, by Michael Gärtner
Lederarbeiten, by Michael Gärtner
Lederarbeiten - Nähen, Flechten, Bearbeiten, by Michael Gärtner (in German language) With his book "Lederarbeiten - Nähen, Flechten, Bearbeiten (Leatherworking - Sewing, Braiding, Working)" on 127 pages, Michael Gärtner provides a clear...
Content 1 piece
€14.99 *
Hint!
Der Mann und seine Axt, by Carsten Bothe
Der Mann und seine Axt, by Carsten Bothe
Der Mann und seine Axt, by Carsten Bothe (in German language) An ax in the house saves the carpenter, but which ax is the right one? The ax, one of the oldest tools of mankind, is enjoying great popularity thanks to the current Bushcraft...
Content 1 piece
€12.99 *
Craft Japan Blades for Swivel Knife
Craft Japan Blades for Swivel Knife
Craft Japan Blades for Swivel Knives These high quality and polished blades are, with the exception of our Barry King swivel knives, suitable for all our swivel knives with a 5.5 mm blade shank. For sharpening we recommend our sharpening...
Content 1 piece
€9.95 *
Details
Selzer Compound Action - Revolving Punch (OVAL Belt Option 3)
Selzer Compound Action - Revolving Punch (OVAL Belt Option 3)
Selzer Compound Action - Revolving Punch (OVAL Belt Variation 3) Including six already inserted, oval & round tubes in diameters of - 4.6 x 3.0 mm (vertical alignment) - 6.3 x 3.5 mm (vertical alignment) - 5.7 x 3.8 mm (vertical...
Content 1 piece
€39.95 *
Selzer Compound Action - Revolving Punch (OVAL Belt Option 2)
Selzer Compound Action - Revolving Punch (OVAL Belt Option 2)
Selzer Compound Action - Revolving Punch (OVAL Belt Variation 2) Including six already inserted, oval & round tubes in diameters of - 4.6 x 3.0 mm (horizontal alignment) - 6.3 x 3.5 mm (horizontal alignment) - 5.7 x 3.8 mm (horizontal...
Content 1 piece
€39.95 *
Selzer Compound Action - Revolving Punch (OVAL Belt Option 1)
Selzer Compound Action - Revolving Punch (OVAL Belt Option 1)
Selzer Compound Action - Revolving Punch (OVAL Belt Variation 1) Including six already inserted, oval tubes in diameters: - 4.6 x 3.0 mm (horizontal alignment) - 6.3 x 3.5 mm (horizontal alignment) - 5.7 x 3.8 mm (horizontal alignment) -...
Content 1 piece
€44.95 *
Aluminium Straight Edge
Aluminium Straight Edge
Aluminium straight edge, available in 2 different lengths With a straight, high-grade stainless steel cutting edge to prevent scraping of the ruler during cutting. The rubber strips inserted in the aluminum body ensure a secure and...
Content 1 piece
From €14.10 *
Details
Stainless Steel Scalpel Handle (#3) incl. 1 Blade
Stainless Steel Scalpel Handle (#3) incl. 1 Blade
Stainless Steel Scalpel Handle (# 3) incl. 1 blade (standard blade No. 11) The stainless steel handle # 3 in surgical quality is suitable for standard blade shapes. Blades can be easily changed. Ideal for the finest work, e.g. in 3D...
Content 1 piece
€12.90 *
Replacement Blades # 11 for Scalpel Handlef (#3) (10 pcs.)
Replacement Blades # 11 for Scalpel Handlef (#3) (10 pcs.)
Replacement Blades No. 11 for Scalpel Handle (# 3) (10 pieces) Individually sterile packed blades. Ideal for the finest work, e.g. in 3D cutting techniques or for filigree cutting. The enclosed blade No. 11 has a long triangular blade...
Content 1 piece
€7.15 *
Kit - Long-Wallet (7 Compartments)
Kit - Long-Wallet (7 Compartments)
Kit - Long Wallet (7 compartments) This kit comes with all items neede for the production of this wallet with snap-button closure in "Half Dollar" look and a chain ring. The leather is pre-cut to fit and can be assembled with the aid of...
Content 1 piece
€125.00 *
Eco - Leather Modeling Tool "Ball"
Eco - Leather Modeling Tool "Ball"
Leather modeler for wet shaping leather. This modeling tool is particularly suitable for drawing medium and wide lines (small ball / large ball).
Content 1 piece
€14.75 *
Eco - Leather Modeling Tool "Pointed Spoon / Point"
Eco - Leather Modeling Tool "Pointed Spoon / Point"
Leather modeler for shaping leather. This modeling tool is particularly suitable for drawing narrow lines and for shaping tooled edges (Pointed Spoon / Angled Tip).
Content 1 piece
€14.75 *
Eco - Leather Modeling Tool "Round Spoon / Point"
Eco - Leather Modeling Tool "Round Spoon / Point"
Leather modeler for shaping leather. This modeling tool is particularly suitable for drawing narrow lines and for shaping tooled edges (rounded spoon / straight tip).
Content 1 piece
€14.75 *
Eco - Leather Modeling Tool "Round Small Spoon"
Eco - Leather Modeling Tool "Round Small Spoon"
Leather modeler for shaping leather. This modeling tool is particularly suitable for forming small curves or elaborating tooled edges. Both sides of the modeling tool are spoon-shaped with a narrow, rounded tip (large / small). Also very...
Content 1 piece
€14.75 *
Eco - Leather Modeling Tool "Small Spoon / Point"
Eco - Leather Modeling Tool "Small Spoon / Point"
Leather modeler for shaping leather. This modeling tool is particularly suitable for drawing narrow lines and for shaping tooled edges (small rounded / straight-topped spoons).
Content 1 piece
€14.75 *
Eco - Leather Modeling Tool "Under Cut / parallel"
Eco - Leather Modeling Tool "Under Cut / parallel"
Leather modeler for shaping leather. This modeling tool is particularly suitable for modeling parallel lines / boundaries and for "lifting" a tooled edge. (Undercut / Fork).
Content 1 piece
€14.75 *
Eco - Leather Modeling Tool "Diamond Spoon/ Point"
Eco - Leather Modeling Tool "Diamond Spoon/ Point"
Leather modeler for shaping leather. This modeling tool is particularly suitable for drawing narrow lines and for shaping tooled edges (large diamond shaped spoon / angled tip).
Content 1 piece
€14.75 *
Eco - Leather Modeling Tool "Large Spoon / Point "
Eco - Leather Modeling Tool "Large Spoon / Point "
Leather modeler for shaping leather. This modeling tool is particularly suitable for drawing narrow lines and for shaping tooled edges (large rounded / angled tip spoon).
Content 1 piece
€14.75 *
Eco - Leather Modeling Tool "Round Small Spoon / Point"
Eco - Leather Modeling Tool "Round Small Spoon / Point"
Leather modeler for shaping leather. This modeling tool is especially suitable for drawing narrow lines, shaping tooled edges and smoothing surfaces (small rounded spoon / angled tip).
Content 1 piece
€14.75 *
Eco - Leather Modeling Tool "Under Cut / Point"
Eco - Leather Modeling Tool "Under Cut / Point"
Leather modeler for shaping leather. This modeling tool is particularly suitable for drawing narrow lines and "lifting" tooled edges (undercut / angled tip).
Content 1 piece
€14.75 *
Leather Modeling Tool "Deluxe Stylus"
Leather Modeling Tool "Deluxe Stylus"
Leather Modeling Tool "Deluxe Stylus" Leather modeler for traversing motifs and shaping of leather. Heavy version with full metal handle. Due to the noticeable weight of the modeler it lays very good in the hand. The non-slip, red finger...
Content 1 piece
€15.00 *
Leather Modeling Tool "Ball / Spoon"
Leather Modeling Tool "Ball / Spoon"
Leather - Modeler / Modeling Tool "Ball Spoon" Special tool for modeling leather. Right: spoon-shaped, semicircular tip up to 4 mm wide (upright to 1 mm); Left: round ball tip with 1.5 mm width. - Allround - Modeler. Also very suitable...
Content 1 piece
€19.95 *
Stainless Steel Leather - Modeler / Modeling Tool "Spoon Creaser"
Stainless Steel Leather - Modeler / Modeling Tool "Spoon Creaser"
Stainless Steel Leather - Modeler / Modeling Tool "Spoon Creaser" Special tool made of stainless steel for modeling and decorating leather. Right: spoon-shaped, semicircular tip up to 4 mm wide (upright to 1 mm); Left: spatula / modeler...
Content 1 piece
€21.90 *
Professional Blade for Swivel Knife
Professional Blade for Swivel Knife
Professional Blade for Swivel Knife (price per piece) These blades are suitable for our swivel knives with a 5.5 mm shank size . The blades, which are made of high-strength and cutting properties HCS 1055 glide very well through the...
Content 1 piece
€36.90 *
Details
Thread Snips
Thread Snips
Thread Snips for easy cutting of yarns and threads. The flat design makes it possible to cut threads flush directly over the last seam hole. Thus a clean seam end is the result. The practical cap allows safe stowage. Overall length 115...
Content 1 piece
€7.80 *
Jeweler´s Rouge
Jeweler´s Rouge
Jeweler`s Rouge, 50 gr. in 5 different grits Please apply the jeweler's rouge to a piece of thin cardboard (e.g., photo cardboard), leather, or our strop board. It is not necessary to dilute these or to change their consistency. Simply...
Content 1 piece
€11.05 *
Details
Coloring with Eco-Flo – Book
Coloring with Eco-Flo – Book
Coloring with Eco-Flo - Book This book, written in English by Tony and Kay Laier, explains various basics of staining techniques and applications based on the Eco-Flo product range on 39 pages. Individual dyeing examples, various...
Content 1 piece
€24.90 *
Raw Hide Hammer
Raw Hide Hammer
Rawhide hammer made of water buffalo raw hide with oak handle available in 3 different sizes. For kickback-free punching of hole punches, tooling stamps, etc. Pick list: # 1 Total weight: 295 grams / head - Ø: 48 mm / total length: 230...
Content 1 piece
From €45.00 *
Details
Steel Square, 300 mm x 200 mm (12“ x 8“)
Steel Square, 300 mm x 200 mm (12“ x 8“)
Steel Square, 300 mm x 200 mm (12“ x 8“) Square made from 1.5 mm, matt black painted steel for glare-free reading. The millimeter scale on all long edges is printed on both sides of the square. This little helper is ideal for vertically...
Content 1 piece
€11.50 *
Craft Japan Roller
Craft Japan Roller
Craft Japan Roller As the name suggests, this tool is designed to apply even pressure over a wider area. When several layers of leather are glued together, e.g. a uniform and firm pressure needed to create long-lasting / permanent bonds....
Content 1 piece
€15.90 *
Craft Japan Center Gauge – Hole Stencil for Straps
Craft Japan Center Gauge – Hole Stencil for Straps
Craft Japan Center Gauge – Holes for Straps, For precisely centered marking of holes on belts and straps. Preset distances in 0.5cm. 2.5 cm equal 1 inch. Usuable for straps up to 40 mm width (approx. 1.5”).
Content 1 piece
€10.90 *
Craft Japan Adjustable Creaser
Craft Japan Adjustable Creaser
Craft Japan Adjustable Creaser Creaser for marking stitch lines or leather decoration. Infinitely variable with a set screw. Maximum distance to the edge is 8.5 mm / thickness of the creases is 0.5 mm.
Content 1 piece
€25.90 *
Osborne Scratch Compass
Osborne Scratch Compass
Osborne Professional Scratch Compass Solid professional scratch compass made from high-quality tool steel with interchangeable scratch tips. The width of the compass can be adjusted with the two set screws. The first set screw mounted on...
Content 1 piece
€211.60 *
Japanese Screw Punch
Japanese Screw Punch
Original Japanese Screw Punch (Screw Punch made in Japan) Japanese patented small screw punch (original product, no imitation). Punches leather, paper, cardboard and fabrics quietly and quickly. The screw punch comes with 2 bits in sizes...
Content 1 piece
€49.90 *
2 From 5
Top seller
Screw Press - Tubes Screw Press - Tubes
Content 1 piece
From €8.50 *
Edge Sanding Stick Edge Sanding Stick
Content 2 piece (€1.85 * / 1 piece)
€3.70 *
Rickert - Professional Swivel Knife Rickert - Professional Swivel Knife
Content 1 piece
€28.95 *
Rickert - Ballpoint Stylus Rickert - Ballpoint Stylus
Content 1 piece
€8.95 *
Craft Japan Hole Punches Ø 0.6 - 30 mm Craft Japan Hole Punches Ø 0.6 - 30 mm
Content 1 piece
From €11.95 *
Craft Japan Blades for Swivel Knife Craft Japan Blades for Swivel Knife
Content 1 piece
From €9.50 *
Selzer Round Hole Punches Ø 1 - 10 mm Selzer Round Hole Punches Ø 1 - 10 mm
From €5.50 *
Silver Pen Silver Pen
Content 1 piece
From €2.95 *
Leatherknife Leder nähen by Professional Oblong Punches Swivel Knife Raw Hide Hammer Lederarbeiten Ergonomic Sergey Steel wad punch Ecken-Rundeiese Craft Japan Craft Japan Strop Board Individualworks Craft Japan Edge Sanding Rickert - Embossing Wheel Button Hole Round Knife Round Strap End Rickert - Screw Press - Silver Pen Blades for Ceramic Blade Craft Japan Craft Japan Jeweler´s Rouge Craft Japan Rickert - Leather Sewing Rickert Leather Sewing Hair Line Tool Japanese Paring Lap Skiver Osborne Fitters Selzer Round Leather Sewing Cutting Mat Rickert - Strap Cutter Bone Folder Screw Press -
Viewed
Shopbewertung - rickert-werkzeug.de
Funktionale

Funktionale Cookies sind für die Funktionalität des Webshops unbedingt erforderlich. Diese Cookies ordnen Ihrem Browser eine eindeutige zufällige ID zu damit Ihr ungehindertes Einkaufserlebnis über mehrere Seitenaufrufe hinweg gewährleistet werden kann.

Session:
Das Session Cookie speichert Ihre Einkaufsdaten über mehrere Seitenaufrufe hinweg und ist somit unerlässlich für Ihr persönliches Einkaufserlebnis.
Merkzettel:
Das Cookie ermöglicht es einen Merkzettel sitzungsübergreifend dem Benutzer zur Verfügung zu stellen. Damit bleibt der Merkzettel auch über mehrere Browsersitzungen hinweg bestehen.
Gerätezuordnung:
Die Gerätezuordnung hilft dem Shop dabei für die aktuell aktive Displaygröße die bestmögliche Darstellung zu gewährleisten.
CSRF-Token:
Das CSRF-Token Cookie trägt zu Ihrer Sicherheit bei. Es verstärkt die Absicherung bei Formularen gegen unerwünschte Hackangriffe.
Login Token:
Der Login Token dient zur sitzungsübergreifenden Erkennung von Benutzern. Das Cookie enthält keine persönlichen Daten, ermöglicht jedoch eine Personalisierung über mehrere Browsersitzungen hinweg.
Cache Ausnahme:
Das Cache Ausnahme Cookie ermöglicht es Benutzern individuelle Inhalte unabhängig vom Cachespeicher auszulesen.
Cookies Aktiv Prüfung:
Das Cookie wird von der Webseite genutzt um herauszufinden, ob Cookies vom Browser des Seitennutzers zugelassen werden.
Cookie Einstellungen:
Das Cookie wird verwendet um die Cookie Einstellungen des Seitenbenutzers über mehrere Browsersitzungen zu speichern.
Herkunftsinformationen:
Das Cookie speichert die Herkunftsseite und die zuerst besuchte Seite des Benutzers für eine weitere Verwendung.
Aktivierte Cookies:
Speichert welche Cookies bereits vom Benutzer zum ersten Mal akzeptiert wurden.
Amazon Pay
PayPal-Zahlungen
Amazon Pay:
Das Cookie wird für Zahlungsabwicklungen über Amazon eingesetzt.
Marketing

Marketing Cookies dienen dazu Werbeanzeigen auf der Webseite zielgerichtet und individuell über mehrere Seitenaufrufe und Browsersitzungen zu schalten.

Google AdSense:
Das Cookie wird von Google AdSense für Förderung der Werbungseffizienz auf der Webseite verwendet.
Google Conversion Tracking:
Das Google Conversion Tracking Cookie wird genutzt um Conversions auf der Webseite effektiv zu erfassen. Diese Informationen werden vom Seitenbetreiber genutzt um Google AdWords Kampagnen gezielt einzusetzen.
Tracking

Tracking Cookies helfen dem Shopbetreiber Informationen über das Verhalten von Nutzern auf ihrer Webseite zu sammeln und auszuwerten.

Google Tag Manager
Partnerprogramm
Google Analytics:
Google Analytics wird zur der Datenverkehranalyse der Webseite eingesetzt. Dabei können Statistiken über Webseitenaktivitäten erstellt und ausgelesen werden.
This website uses cookies to ensure you get the best experience on our website.
Impressum
Top