Conchos

Close filters
  •  
  •  
from to
  •  
  •  
  •  
  •  
  •  
2 From 2
No results were found for the filter!
Concho Native American / Western I / 6
Concho Native American / Western I / 6
Steel and brass Concho for lacing through. Specifications: # 1 small: Ø 25 mm # 2 medium: Ø 32 mm # 3 big: Ø 38 mm
Content 1 piece
From €9.00 *
Stamped Steel Concho, Horseshoe (antique silver)
Stamped Steel Concho, Horseshoe (antique silver)
Stamped Steel Concho, Horseshoe (antique silver) Our Conchos, stamped out of sheet steel, are fastened with the help of the round-headed rivets on the back (see picture 2). The rivet has a length of 7 mm and is suitable for insertion in...
Content 1 piece
€1.55 *
Stamped Steel Concho, Cross V (antique silver)
Stamped Steel Concho, Cross V (antique silver)
Stamped Steel Concho, Cross V (antique silver) Our Conchos, stamped out of sheet steel, are fastened with the help of the round-headed rivets on the back (see picture 2). The rivet has a length of 7 mm and is suitable for insertion in...
Content 1 piece
€1.50 *
Stamped Steel Concho, Star "3-D" (antique silver)
Stamped Steel Concho, Star "3-D" (antique silver)
Stamped Steel Concho, Star "3-D" (antique silver) Our Conchos, stamped out of sheet steel, are fastened with the help of the round-headed rivets on the back (see picture 2). The rivet has a length of 7 mm and is suitable for insertion in...
Content 1 piece
€2.10 *
Stamped Steel Concho, Horse (antique silver)
Stamped Steel Concho, Horse (antique silver)
Stamped Steel Concho, Horse (antique silver) Our Conchos, stamped out of sheet steel, are fastened with the help of the round-headed rivets on the back (see picture 2). The rivet has a length of 7 mm and is suitable for insertion in...
Content 1 piece
€2.10 *
Stamped Steel Concho, Floral V
Stamped Steel Concho, Floral V
Stamped Steel Concho, Floral V (antique silver) Our Conchos, stamped out of sheet steel, are fastened with the help of the round-headed rivets on the back (see picture 2). The rivet has a length of 7 mm and is suitable for insertion in...
Content 1 piece
€1.90 *
Stamped Steel Concho, Cross IV (antique silver)
Stamped Steel Concho, Cross IV (antique silver)
Stamped Steel Concho, Cross IV (antique silver) Our Conchos, stamped out of sheet steel, are fastened with the help of the round-headed rivets on the back (see picture 2). The rivet has a length of 7 mm and is suitable for insertion in...
Content 1 piece
€1.90 *
Stamped Steel Concho, Celtic Cross (antique silver)
Stamped Steel Concho, Celtic Cross (antique silver)
Stamped Steel Concho, Celtic Cross (antique silver) Our Conchos, stamped out of sheet steel, are fastened with the help of the round-headed rivets on the back (see picture 2). The rivet has a length of 7 mm and is suitable for insertion...
Content 1 piece
€1.50 *
Concho Symbols I / 1
Concho Symbols I / 1
Steel - Concho (nickelplated) screwed from the back (screw included). Specifications: # 01: Ø 24,8 mm / for leather between 3,0 mm and 5,0 mm. Use a 5,0 mm holepunch. # 02: Ø 25,7 mm / for leather between 3,5 mm and 6,5 mm. Use a 5,0 mm...
From €5.50 *
Concho Western / Star I / 3
Concho Western / Star I / 3
Steel - Concho (brass finish), screwed from the back (screw included). Suitable for leather from 3,5 mm to 6,0 mm in thickness. We recommend a 5,0 mm holepunch. Specifications: # 01: Ø 9,0 mm (riveted) for 3,0 mm leather maximum. Please...
From €2.80 *
Concho Western / Star I / 2
Concho Western / Star I / 2
Steel - Concho (nickelplated), screwed from the back (screw included). Suitable for leather from 3,5 mm to 6,0 mm in thickness. We recommend a 5,0 mm holepunch. Specifications: # 01: Ø 9,0 mm (riveted) for 3,0 mm leather maximum. Please...
From €2.80 *
Screws and leather discs for conchos
Screws and leather discs for conchos
10 screws for conchos and 25 leather discs In case you want to fix conchos in thin leather use leather dics for distancing. Leather dics are mandatory when converting a concho into a snap button, especially when using thin leather.
€8.10 *
Concho Line 24 Snap Adapter
Concho Line 24 Snap Adapter
Use this adapter to convert any screwback conchos into a Line 24 snap button
€7.00 *
Concho Western I / 5
Concho Western I / 5
Steel - Concho (nickelplated), screwed from the backside (screw included). Specifications: # 01: Ø 38,5 mm / for leather from 1,5 mm to 3,5 mm # 02: Ø 25,0 mm / for leather from 3,5 mm to 6,5 mm # 03: 38,5 x 22,0 mm / for leather from...
€7.40 *
Concho Cross III
Concho Cross III
Steel - Concho aus (nickelplated), screwed from the backside (screw included). Suitable for leather from 3,0 mm to 6,0 mm. Specifications: # 01: 18,3 x 25,6 mm # 02: 18,3 x 25,6 mm # 03: 29,0 x 32,0 mm
From €3.25 *
Concho Ritter I / 2
Concho Ritter I / 2
Steel - Concho (nickel plated), screwed from the backside (screw included) For leather from 4,0 mm to 7,0 mm, please use a 5,0 mm holepunch. Specifications : # 01: 42,5 x 30,5 mm # 02: 30,5 x 30,5 mm # 03: 33,0 x 27,0 mm # 04: Ø 30,4 mm
€4.10 *
Concho Western / Star I / 1 (nickelplated)
Concho Western / Star I / 1 (nickelplated)
Concho Western / Star I / 1 (nickel plated) Steel - Concho (nickel plated), screwed from the back (srew included). For leather of minimum 3 mm thickness and maximum of 5 mm (except #05 the recommended leatherthickness is 4,0 mm - 6,5...
From €4.35 *
Concho Horses I / 2
Concho Horses I / 2
Concho Steel (nickelplated) is screwed from the back (screw included). For insertion into leather up to 6 mm thick. Minimum thickness of leather 3 mm. For pre-punching we recommend a punch with Ø 5 mm. Alternatively you can use one of...
From €6.10 *
Concho Biker / Cross I
Concho Biker / Cross I
Steel - Concho (nickelplated), screwed from the backside (screw included). Specifications: # 01: Ø 28,8 mm / for leather from 2,0 mm to 4,0 mm, use a 5,0 mm holepunch. # 02: Ø 28,8 mm / for leather from 2,0 mm to 4,0 mm, use a 5,0 mm...
€3.95 *
Concho Celtic I / 3
Concho Celtic I / 3
Steel - Concho (nickelplated), screwed from the backside (screw included). For leather from 3,5 mm to 6,0 mm, we recommend a 5,0 mm holepunch. Specifications: # 01: Ø 26,1 mm # 02: Ø 26,1 mm # 03: Ø 26,1 mm
From €3.95 *
Concho Horses I / 1
Concho Horses I / 1
Steel - Concho (nickelplated), screwed from the backside (screw included). For leather from 4,5 mm to 6,0 mm thickness use a 5,0 mm holepunch. Specifications: # 01: 45,5 x 25,0 mm # 02: 45,5 x 25,0 mm # 03: 29,0 x 29,0 mm # 04: 29,0 x...
€6.70 *
Concho Cetltic I / 2
Concho Cetltic I / 2
Concho Steel (nickelplated) is riveted / screwed from the back (screw included). For insertion into leather up to 6 mm thick. Minimum thickness of leather 3 mm. For pre-punching we recommend a punch with Ø 5 mm. Alternatively you can use...
From €4.60 *
Concho Cross II
Concho Cross II
Concho Steel (nickelplated) is riveted / screwed from the back (screw included). For insertion into leather up to 6 mm thick. Minimum thickness of leather 3 mm. For pre-punching we recommend a punch with Ø 5 mm. Alternatively you can use...
From €4.60 *
Concho Celtic I / 1
Concho Celtic I / 1
Steel - Concho (nickel plated), screwed from the backside (screw included). Specifications: # 01: 49,0 x 29,0 mm for leather up to 2,5 mm thickness, use 2,0 mm holepunch. # 02: 31,0 x 31,0 mm # 03: Ø 25 mm for leather between 2,5 mm and...
From €4.55 *
Concho Ritter I / 1
Concho Ritter I / 1
Concho aus Stahl (vernickelt), wird von der Rückseite verschraubt (Schraube im Lieferumfang enthalten). Zum Einsetzen in bis zu 7 mm dickes Leder. Mindestdicke des Leders 3 mm. Zum Vorlochen empfehlen wir Ihnen ein Locheisen mit Ø 5 mm....
From €3.95 *
Concho Biker / Skull III
Concho Biker / Skull III
Steel - Concho (nickelplated), screwed from the backside (screw included). For leather from 3,0 mm to 7,0 mm, please consider the use of a 5,0 mm holepunch. Specifications: # 01: 36,3,0 x 26,8 mm # 02: 36,3,0 x 26,8 mm # 03: Ø 30,4 mm #...
€6.10 *
Concho Cross I
Concho Cross I
Steel - Concho (nickelplated), screwed from the backside (screw included). For leather from 3,0 mm to 7,0 mm, please use a 5,0 mm holepunch. Spezifications: # 01: Ø 12,5 mm # 02: Ø 19,0 mm # 03: Ø 25,4 mm # 04: Ø 30,0 mm
From €4.00 *
Concho Native American / Western I / 1
Concho Native American / Western I / 1
Solid brass Concho for lacing through. Specification: big: Ø 39,2 mm medium: Ø 33,3 mm small: Ø 25,5 mm
From €4.50 *
Concho Native American/ Western I / 3
Concho Native American/ Western I / 3
Steel - Concho for lacing through. Specifications: big: Ø 39,2 mm medium: Ø 33,3 mm small: Ø 25,5 mm
From €3.90 *
Conch Native American / Western I / 2
Conch Native American / Western I / 2
Solid brass Concho for lacing through. Specification: big: Ø 39,2 mm medium: Ø 33,3 mm small: Ø 25,5 mm
From €5.20 *
Concho Native American / Western I / 4
Concho Native American / Western I / 4
Steel - Concho for lacing through. Specifications: big: Ø 39,2 mm medium: Ø 33,3 mm small: Ø 25,5 mm
From €3.90 *
Concho Floral IV / 1
Concho Floral IV / 1
Concho made of steel (nickel plated) in two different sizes. Is screwed from the back (screw included). If you want to turn your Concho into a push-button, we recommend the push-button extension. If your leather does not have the correct...
From €4.70 *
Concho Floral IV / 2
Concho Floral IV / 2
Concho made of steel (nickel plated) in two different sizes. Is screwed from the back (screw included). If you want to turn your Concho into a push-button, we recommend the push-button extension. If your leather does not have the correct...
€4.70 *
Concho Floral I / 2
Concho Floral I / 2
Steel - Concho (nickelplated), screwed from the backside (screw included). Suitable for leather from 3,0 mm to 7,0 mm thickness, we recommend a 5,0 mm holepunch. Options: # 01: 34,0 x 23,0 mm # 02: 26,0 x 25,0 mm # 03: Ø 25,5 mm # 04:...
€6.10 *
Concho Floral II
Concho Floral II
Steel - Concho (nickelplated), screwed from the backside (screw included). Suitable for leather from 3,0 mm to 7,0 mm, we recommend a 5,0 mm holepunch. Options: # 01 : 26,4 x 25,4 mm # 02 : Ø 25,0 mm # 03 : 25,5 x 31,3 mm # 04 : 27,1 x...
From €6.50 *
Concho Floral III
Concho Floral III
Steel - Concho (vernickelt), screwed from the backside (screw included). For leather from 3,5 mm to 7,0 mm use a 5,0 mm holepunch. Specifications: # 01: 31,0 x 33,0 mm # 02: 29,0 x 26,0 mm # 03: Ø 26 mm # 04 : 46,0 x 23,0 mm # 05: 50,0 x...
From €3.95 *
Concho Biker / Skull I
Concho Biker / Skull I
Concho Steel (nickelplated) is screwed from the back (screw included). For insertion into leather up to 6 mm thick. Minimum thickness of leather 3 mm. For pre-punching we recommend a punch with Ø 5 mm. Alternatively you can use one of...
€6.10 *
Concho Biker / Skull II
Concho Biker / Skull II
Steel - Concho (nickelplated), screwed from the backside (screw included). For leather from 3,0 mm to 7,0 mm, please select a 5,0 mm holepunch. Spezifications: # 01: 50,0 x 28,0 mm # 02: Ø 28,0 mm # 03: 51,0 x 26,0 mm # 04: 93,0 x 34,0 mm
From €3.20 *
Conch Floral I
Conch Floral I
Steel - Concho (nickelplated), for leather between 3,0 mm and 5,0 mm thickness. Please use a 5,0 mm holepunch. Speifications: # 01: Ø 13,0 mm # 02: Ø 19,5 mm # 03: Ø 26,0 mm # 04: Ø 32,0 mm
From €5.10 *
Concho Skull
Concho Skull
Steel - Concho "Skull" (nickelplated). Suitable for leather from 4,0 - 6,0 mm Specifications: hight: 24 mm / width: 29 mm - #1: Skull looking to the right - #2 : Skull looking to the left
€6.10 *
2 From 2
Viewed
Shopbewertung - rickert-werkzeug.de
Top