GIARDINI - MAXEDGE™ Pro Fluo Edge Paint

GIARDINI - MAXEDGE™ Pro Fluo Edge Paint

Edge sealing / edge varnish

Our MAXEDGE™ Pro Fluo Edge Paints are available in 5 fluorescent colours. All colours appear after applying to the leather in the colour that is already represented in its liquid stage. MAXEDGE™ Pro Fluo Edge Paints dry with a satin matt finish and cover the leather edge with a rubbery, hard to peel paint application that is soft and pliable.

Info: MAXEDGE™ Pro Protecting Gloss can be used for final fixation. This creates a shiny edge.

Excellent features:

• VOC reduced (volatile organic compounds)
• waterproof when dried
• very abrasion, cut and scratch resistant
• rubbery paint application
• non-fading
• very pliable (colour does not break during movement)
• soft edge when dried out (no rough, protruding leather fibres that reduce the feeling of a pleasant edge)
• subsequent polishing is not necessary
• dilutable with up to 20% water

Consistency: viscous

Important!:

• Only use the edge paints for leather edges.
• Edge paints are not suitable for colouring the grain or flesh side of leather.
• Please always test on a sample first before dyeing on the actual workpiece. This way unpleasant results can be avoided in advance.
• If you want to add water to dilute, always use distilled water.
• Do not leave the bottle standing opened for too long.
• Store the product at the same temperature as possible.
• Use within 6 months after opening.

Application:

1. Prepare the leather edge for dyeing by sanding it with a fine grit sandpaper and / or burnishing the edge.
2. Stir the edge paint thoroughly. Please do not shake, as otherwise bubbles form which dissolve only very slowly.
3. Apply the edge paint to the leather edge with a brush, wool dauber or our edge roller. Please make sure that any edge colour on the surface is wiped off immediately with a damp cloth, to avoid uneven edges and staining.
4. For a denser paint application apply another coat of edge paint to your work piece.
5. Wait approx. 20 min. (Our MAXEDGE™ Pro Fluo Edge Paints dry a bit slower than other manufacturers' products, so you have plenty of time to paint even long edges without the need to rush.)
6. After about an hour, the edge paint is dry and adheres firmly to the edge. A subsequent polishing is no longer necessary.

Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.