Products from C. S. Osborne

C. S. Osborne
Close filters
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
No results were found for the filter!
Osborne Scratch Compass
Osborne Scratch Compass
Osborne Professional Scratch Compass Solid professional scratch compass made from high-quality tool steel with interchangeable scratch tips. The width of the compass can be adjusted with the two set screws. The first set screw mounted on...
Content 1 piece
€211.60 *
Osborne Fitters Hammer
Osborne Fitters Hammer
Osborne Fitters' Hammer The fitters' hammer is made of malleable iron. The polished hammer surfaces are used used for smoothing/tamping of seams or smoothing leather. Even freshly glued leather parts can be wonderfully pressed together...
Content 1 piece
€41.65 *
Osborne Single Creaser
Osborne Single Creaser
Osborne Single Creaser Typically Osborne, forged from excellent tool steel, for hands-free creation of a decorative grooves in leather. For use, moisten the areas to be worked on and leave them return to the original colour. Now you can...
Content 1 piece
€75.95 *
Osborne Rosette Cutter
Osborne Rosette Cutter
Osborne Rosette Cutters (in 8 different sizes) High quality rosette cutters from Osborne. For punching rosette-shaped discs from leather, cardboard or rubber as a decorative disc or as a base for a concho. The massive, forged handle...
Content 1 piece
€213.90 *
Osborne Splitting Machine
Osborne Splitting Machine
Professional Leather Splitter by C. S. Osborne. Cast iron frame, weight approx. 5.74 kg, maximum width of the leather to be split 205 mm. To ensure that the machine is secure, we recommend to affix it onto your workbench with 4 screws...
Content 1 piece
€1,440.00 *
Osborne Bissonette Edger
Osborne Bissonette Edger
Osborne Bissonette edger / edge beveler, for chamfering leather edges and rounding off edges in 6 different sizes. This tool can be used in contrast to the common edger / edge beveler by pushing or pulling. Working and guiding this edger...
Content 1 piece
€86.40 *
Osborne Creaser
Osborne Creaser
Osborne Creaser / Edge Beader / Push Beader To create a decorative groove (crease) while rounding the edge of the leather. Available in 5 different sizes. The tools have a fixed stop whose distance reflects the respective tool size. For...
Content 1 piece
€50.25 *
Copper Rivets & Burrs
Copper Rivets & Burrs
Copper Rivets & Burrs Can be shortened if necessary, but then again a conical bevel of the shaft is required to put on the disc. For insertion and riveting, we recommend our riveting - insertion tool. Length 19 mm, Ø shaft 3,4 mm, Ø head...
Content 1 piece
From €0.32 *
Osborne Poly Hammer No.496
Osborne Poly Hammer No.496
Osborne Poly Hammer no. 496 with hardwood handle. For use with tooling stamps, hole punches, braiding irons, etc. (straight face). Little kickback due to impact absorbing poly hammer head. 240 gm total weight / head - Ø 45 mm / total...
Content 1 piece
€26.90 *
Osborne Cobbler Hammer No.65
Osborne Cobbler Hammer No.65
Cobbler hammer with 480 grams total weight. Total length: 270 mm, hickory stem. Convex striking surface with 33 mm diameter, head length 145 mm Not suitable for hitting steel tools.
Content 1 piece
€69.30 *
Osborne Cobbler Hammer No.66
Osborne Cobbler Hammer No.66
Cobbler hammer with 420 g. Total weight. Handle length 240 mm, hickory stem. Forged hammer head. Crowned striking surface and 35 mm diameter, head length 95 mm. Not suitable for hitting steel tools.
Content 1 piece
€87.35 *
Osborne Snaps 10 pc. (brass)
Osborne Snaps 10 pc. (brass)
Osborne push-button/snap 10 pcs. (ring spring, brass) 10 simple push-button/snaps with 12.5 or 15.0 mm head diameter. Each push-button consists of 4 parts.- Please use our revolver punch or mini punch set to prepare the holes (3 / 4mm),...
Content 10 piece (€0.85 * / 1 piece)
From €8.50 *
Osborne Snaps 10 pc. (nickel plated brass)
Osborne Snaps 10 pc. (nickel plated brass)
Osborne push-button/snap 10 pcs. (ring spring, nickel plated brass) 10 simple push-buttons/snaps with 12.5 or 15.0 mm head diameter. Each push-button/snap consists of 4 parts.- Please use our revolver punch or mini punch set to prepare...
Content 10 piece (€0.77 * / 1 piece)
From €7.70 *
Osborne Snaps 10 pc. (Line 20 / Ø 12.5 mm)
Osborne Snaps 10 pc. (Line 20 / Ø 12.5 mm)
10 simple push-buttons/snaps with 12.5 mm head diameter (ring spring). Each push-button/snap consists of 4 parts.- Please use our revolver punch or mini punch set to prepare the holes (3 / 4mm), our setting tool to insert the snaps....
Content 10 piece (€0.52 * / 1 piece)
€5.20 *
Osborne Snaps 10 pc. (Line 24 / Ø 15.0 mm)
Osborne Snaps 10 pc. (Line 24 / Ø 15.0 mm)
10 simple push-buttons/snaps with 15.0 mm head diameter (ring spring). Each push-button/snap consists of 4 parts.- Please use our revolver punch or mini punch set to prepare the holes (3 / 4mm), our setting tool to insert the snaps....
Content 10 piece (€0.55 * / 1 piece)
€5.50 *
Osborne Snap Setting Tool
Osborne Snap Setting Tool
Osborne Snap Setting Tool Available options: - small: Line 20 (small snaps / Ø 12.5 mm) - big: Line 24 (big snaps / Ø 15,0 mm) Or you use our universal snap setting tool (suitable for both sizes). Please use our revolving punch or mini...
€32.20 *
Osborne Snap - Set
Osborne Snap - Set
Osborne push-button/snap set 6 silver-colored, simple push-buttons/snaps incl. setting tool. Please use our revolver punch or mini punch set to prepare the holes (3 / 4mm), our setting tool to insert the snaps. For insertion in up to 3 /...
€45.25 *
Replacement Needle for Automatic Awl
Replacement Needle for Automatic Awl
Replacement needle (for automatic awl) Available options: - thick straight needle (length 54 mm / Ø 1.9 mm) - narrow straight needle (length 45 mm / Ø 1.5 mm) - curved needle (length 44 mm / Ø 1.6 mm) When ordering 1 piece, you will...
Content 1 piece
€10.25 *
Osborne Leather Modeling Tool "Under Cut / parallel"
Osborne Leather Modeling Tool "Under Cut / parallel"
Osborne Leather Modeler Special tool for modeling leather. Right: oval, "deer foot" -shaped tip with 3.0 mm width; Left: 2 fine, angular, parallel tips, each 1.5 mm wide. - Perfect for modeling parallel strokes / borders and "lifting" a...
Content 1 piece
€29.55 *
Osborne Leather Modeling Tool "Spoon / Point"
Osborne Leather Modeling Tool "Spoon / Point"
Osborne Leather Modeler Special tool for modeling leather. Right: spoon-shaped, semicircular tip up to 4.5 mm wide (upright to 2 mm); Left: fine, round, tapered tip up to 1 mm wide. - Perfectly suitable allround modeler. Also very...
Content 1 piece
€35.00 *
Osborne Leather Modeling Tool „Deer Foot“
Osborne Leather Modeling Tool „Deer Foot“
Osborne Leather Modeling Tool „Deer Foot“ Special tool for modeling leather. Right: conical tip up to 2.5 mm wide, half-round recessed; Left: fork-shaped, spoon-shaped, tapered tip up to 1 mm wide. - Perfect for modeling leather edges....
Content 1 piece
€13.10 *
Osborne Leather Modeling Tool "Pointed Spoon / Point"
Osborne Leather Modeling Tool "Pointed Spoon / Point"
Osborne Leather - Modeler Special tool for modeling leather. Right: diamond / spoon shaped tip up to 3.5 mm wide. Left: fine, round, tapered tip up to 1 mm wide. - Perfect for modeling corners or fine lines. Also very suitable for...
Content 1 piece
€24.30 *
Osborne Mattress Needles
Osborne Mattress Needles
Osborne Mattress Needles 4 needles in an assortment of sizes: - 1 x 64 mm / Ø 0,9 mm - 1 x 76 mm / Ø 1,0 mm - 1 x 89 mm / Ø 1,2 mm - 1 x 102 mm / Ø 1,2 mm
Content 1 set
€5.40 *
Osborne Replacement Blades Skiver
Osborne Replacement Blades Skiver
Osborne Replacement Blades for "The Skife" Replacement blades for skife knife. This blade is also suitable for many other tools from our range. (strap cutter, edge planer, etc.)
Content 1 piece
From €0.80 *
Osborne Space Marker Size 7
Osborne Space Marker Size 7
Osborne Space Marker (pricking wheel) size 7 For marking leather for stitching at a distance of 3,8 mm per stitch.
Content 1 piece
€41.65 *
Osborne Wood Creaser
Osborne Wood Creaser
Osborne Wood Creaser. To mark the distance for a seam or ornament along a leather edge. 4 different distances can be marked 1.0 mm, 2.0 mm, 2.5 mm and 4.8 mm. Total length 133 mm.
Content 1 piece
€22.85 *
Osborne Awl No. 478
Osborne Awl No. 478
Osborne Awl No. 478 For pricking leather or similar materials. Total length 99 mm, Ø max. 3.3 mm
Content 1 piece
€8.80 *
Osborne Space Marker Size 5
Osborne Space Marker Size 5
Osborne Space Marker (pricking wheel) size 5 For marking leather for stitching at a distance of 5 mm per stitch.
Content 1 piece
€79.00 *
Osborne Awl Haft No. 928
Osborne Awl Haft No. 928
Osborne Awl No. 928 Total length 95 mm. Beech handle with brass collet. Suitable for all awls of our assortment.
€27.50 *
Osborne "Skife"
Osborne "Skife"
Osborne Skife / leather skiver / paring knife with curved cutting edge For paring leather edges. Replaceable blade. Overall length 170 mm, length 37.5 mm Spare blades can be found under "Accessories".
Content 1 piece
€21.90 *
Osborne Small Hole Punch Set (2.0 – 4.8 mm)
Osborne Small Hole Punch Set (2.0 – 4.8 mm)
Osborne Small Hole Punch Set For punching small holes in leather. 7-hole tubes in diameters 2.0 mm, 2.4 mm, 2.8 mm, 3.2 mm, 4.0 mm, 4.4 mm and 4.8 mm. Please use a suitable hammer (not a steel hammer) and a suitable base (work plate,...
Content 1 set
€80.45 *
Osborne Leather Scissors
Osborne Leather Scissors
Osborne Leather Scissors Professional leather scissors. Cuts leather up to approx. 4 mm thickness. Total length 210 mm, cutting edge 74 mm.
Content 1 piece
€95.00 *
Osborne Thread – Tube of waxed Thread 169 m
Osborne Thread – Tube of waxed Thread 169 m
Osborne Thread - Tube of waxed Thread 169 m, thread thickness approx. 0.8 mm. Waxed thread for sewing leather. Glides easily and water repellent, for professional seams. Please choose between the colors black or brown. Please note that...
Content 169 linear meters (€0.36 * / 1 linear meters)
€61.65 *
Osborne Edger
Osborne Edger
Osborne edger / edge beveler size 2 For chamfering leather edges. American maple handle with brass ferrule.
Content 1 piece
€80.70 *
Osborne Awl Haft incl. Diamond and Stabbing Awl
Osborne Awl Haft incl. Diamond and Stabbing Awl
Osborne Awl Haft Set - Haft incl. 2 diamond shaped and 1 stabbing awls. When ordering this combination, you will receive: - 1 Osborne awl haft (OSB_928) - 2 awls - diamond shaped Blanchard 45 mm (OSB_B-45) - 1 stabbing awls 50 mm (OSB_S-50)
Content 1 piece
€32.95 * €34.72 *
Osborne Rivet Setter – Setting Tool
Osborne Rivet Setter – Setting Tool
Osborne Rivets Setting Tool For setting and pressing copper rivets, e.g. our copper rivet OSB # 1700-12. Please allow at least 2 mm excess of the shaft before riveting. Total length 114 mm.
€57.40 *
Osborne Thread – Reel of waxed Thread 11.5 m
Osborne Thread – Reel of waxed Thread 11.5 m
Osborne Thread - Reel of waxed Thread 11.5 m Yarn thickness approx. 0.8 mm. Waxed yarn for sewing leather. Glides easily and water repellent, for professional seams. The reel fits our automatic awl or Osborne automatic awl but can be...
Content 11.5 linear meters (€1.12 * / 1 linear meters)
€12.85 *
Osborne Lacing Needle
Osborne Lacing Needle
Osborne Lacing Needles Spring steel. The leather braid can be clamped in the rear area. Length 57 mm / thickness 0.9 mm
Content 1 piece
€0.95 *
Osborne Sewing Palm
Osborne Sewing Palm
Sewing Palm for pushing needles through leather. Strong leather, riveted. Please choose between right and left handed version.
€39.30 *
Osborne Automatic Awl No. 413
Osborne Automatic Awl No. 413
Osborne Automatic Awl With this automatic awl you can work immediately and create a lockstitch seam. An instruction manual is enclosed. Content: 1 pc. Awl haft 1 spool of waxed black thread 11.5 m 1 straight needle 1 curved needle 1 pc....
Content 1 piece
€50.70 *
Osborne Revolving Punch (2.0 – 4.8 mm)
Osborne Revolving Punch (2.0 – 4.8 mm)
Osborne Revolving Punch Six tubes in diameters of 2.0 / 2.4 / 2.8 / 3.2 / 4.0 and 4.8 mm. For hole punching of leather and similar materials.
Content 1 piece
€37.85 *
Osborne Bone Folder
Osborne Bone Folder
Osborne Bone Folder Polished, genuine cattle bone folder pasting and folding and various other applications. Dimensions: Length: 160 mm Width: 21 mm Thickness: 5 mm
Content 1 piece
€31.70 *
Osborne Adjustable Gouge U-shaped
Osborne Adjustable Gouge U-shaped
Osborne adjustable gouge U-shaped For planing joints in leather. The cutting depth continuously variable. Ideal for "sharp" edges or recessing stitches.
Content 1 piece
€53.35 *
Osborne Adjustable Gouge V-shaped
Osborne Adjustable Gouge V-shaped
Osborne adjustable gouge V-shaped For planing joints in leather. The cutting depth continuously variable. Ideal for "sharp" edges or recessing stitches.
Content 1 piece
€53.35 *
Viewed
Shopbewertung - rickert-werkzeug.de
Top