Hole & Strap End Punches

Close filters
  •  
  •  
  •  
  •  
  •  
from to
  •  
  •  
1 From 2
No results were found for the filter!
Detail - Locheisen (0,5 mm)
Detail - Locheisen (0,5 mm)
Detail - Punch Punch - round cross-section with Ø 0,5 mm . Tool for punching very fine holes. Due to the small wall thickness of the punch, a very precise punching is possible. Please use a suitable hammer (not a steel hammer) and a...
Content 1 piece
€8.80 *
Detail - Locheisen (Nadel)
Detail - Locheisen (Nadel)
Detail - Punch Punch - round cross-section with Ø 0.3 mm . Tool for punching very fine holes or for marking seam lines on leather. This punch works similar to an awl, no material is punched out but displaced. Please be sure to use a...
Content 1 piece
€8.80 *
Craft Japan English Point Strap End Punches
Craft Japan English Point Strap End Punches
Craft Japan English Point Strap End Punches For cutting even ends on belts and straps. Available options: - Max. width 30 mm - Max. width 35 mm - Max. width 40 mm When ordering 1 piece you will receive 1 Craft Japan English point strap...
Content 1 piece
From €28.95 *
Craft Japan Oval – Hole Punch
Craft Japan Oval – Hole Punch
Craft Japan Oval Punches For punching oval holes in leather or similar materials. Please use a suitable base for punching, e.g. hard rubber or hardwood board and use a wood or nylon head tooling hammer, see accessories. Available...
Content 1 piece
€19.90 *
Craft Japan Hole Punches Ø 0.6 - 30 mm
Craft Japan Hole Punches Ø 0.6 - 30 mm
Craft Japan Hole Punches Ø 0,6 - 30 mm High-quality, polished hole punches for leather or similar materials. Please use a hard base and a suitable hammer (no metal hammer, risk of splintering) see accessories. Available options: No. 2 =...
Content 1 piece
From €8.10 *
Selzer Compound Action - Revolving Punch (OVAL Belt Option 1)
Selzer Compound Action - Revolving Punch (OVAL Belt Option 1)
Selzer Compound Action - Revolving Punch (OVAL Belt Variation 1) Including six already inserted, oval tubes in diameters: - 4.6 x 3.0 mm (horizontal alignment) - 6.3 x 3.5 mm (horizontal alignment) - 5.7 x 3.8 mm (horizontal alignment) -...
Content 1 piece
€31.95 *
Selzer Compound Action - Revolving Punch (OVAL Belt Option 3)
Selzer Compound Action - Revolving Punch (OVAL Belt Option 3)
Selzer Compound Action - Revolving Punch (OVAL Belt Variation 3) Including six already inserted, oval & round tubes in diameters of - 4.6 x 3.0 mm (vertical alignment) - 6.3 x 3.5 mm (vertical alignment) - 5.7 x 3.8 mm (vertical...
Content 1 piece
€31.95 *
Selzer Compound Action - Revolving Punch (OVAL Belt Option 2)
Selzer Compound Action - Revolving Punch (OVAL Belt Option 2)
Selzer Compound Action - Revolving Punch (OVAL Belt Variation 2) Including six already inserted, oval & round tubes in diameters of - 4.6 x 3.0 mm (horizontal alignment) - 6.3 x 3.5 mm (horizontal alignment) - 5.7 x 3.8 mm (horizontal...
Content 1 piece
€29.95 *
Japanese Screw Punch
Japanese Screw Punch
Original Japanese Screw Punch (Screw Punch made in Japan) Japanese patented small screw punch (original product, no imitation). Punches leather, paper, cardboard and fabrics quietly and quickly. The screw punch comes with 2 bits in sizes...
Content 1 piece
€49.90 *
Tubes for Japanese Screw Punch
Tubes for Japanese Screw Punch
Tubes for the original Japanese screw punch (screw punch made in Japan) in 7 different sizes Original tubes for our Japanese screw punch. Available in following sizes: - 1.0 mm - 1.5 mm - 2.0 mm - 2.5 mm - 3.0 mm - 3.5 mm - 4.0 mm Note:...
Content 1 piece
€10.50 *
Screw Press Anvil
Screw Press Anvil
Screw Press Anvil - 3 different sizes Available anvils (Ø mm): 12 mm, 24 mm, 28 mm Hint: - Anvils require an insert with a diameter of 12 mm. When ordering, you will receive 1 anvil of the chosen size!
Content 1 piece
From €12.95 *
Screw Press - Professional 2
Screw Press - Professional 2
Screw Press - Professional 2 Suitable for professionals and home users. For fatigue-free punching of holes into thick leather and setting rivets or snaps. Professional version with 15.5 cm projection. Hint: - For the use and setting of...
Content 1 piece
€239.90 *
Screw Press - Free Arm
Screw Press - Free Arm
Screw Press - Free Arm Suitable for professionals and home users. Due to the free-arm design, it is easy to punch holes, set rivets or snaps into already finished items such as pouches for instance. Hint: - For the use and setting of...
Content 1 piece
€174.90 *
Screw Press Hobby
Screw Press Hobby
Screw Press - Hobby Suitable for home users who want to connect press studs or rivets or punch holes occasionally. Hint: - For the use and setting of snaps and rivets you will need the appropriate tool inserts. Inserts are not included ,...
Content 1 piece
€116.00 *
Screw Press - Hobby 2
Screw Press - Hobby 2
Screw Press - Hobby 2 Suitable for home users who want to connect press studs or rivets or punch holes occasionally. Hint: - For the use and setting of snaps and rivets you will need the appropriate tool inserts. Inserts are not included...
Content 1 piece
€149.00 *
Screw Press - Tubes
Screw Press - Tubes
Screw Press Tubes - 15 different sizes Available tubes (Ø mm): 0.5 - 7 mm + 8 mm Hint: - The tubes only fit into screw presses witht the below dimensions. Dimensions: Top thread: 1/4 "with 24 pitch (6.35 mm) Insert below: Ø 12 mm When...
Content 1 piece
From €6.95 *
Screw Press - Professional
Screw Press - Professional
Screw Press - Professional Suitable for professionals and home users. For fatigue-free punching of holes in thick leather and for inserting rivets or snaps. Professional version with 12.5 cm projection. Hint: - For the use and setting of...
Content 1 piece
€184.90 *
Osborne Rosette Cutter
Osborne Rosette Cutter
Osborne Rosette Cutters (in 8 different sizes) High quality rosette cutters from Osborne. For punching rosette-shaped discs from leather, cardboard or rubber as a decorative disc or as a base for a concho. The massive, forged handle...
Content 1 piece
€213.90 *
Craft Japan Oblong Punch
Craft Japan Oblong Punch
Craft Japan Oblong Hole Punch (in 4 different sizes) High quality and manufactured with Japanese precision. For punching elongated holes into leather, cardboard, rubber, etc. to e.g. pull a strap through. The punches are already very...
Content 1 piece
From €25.50 *
Craft Japan Profi Oblong Punch
Craft Japan Profi Oblong Punch
Craft Japan Oblong Hole Punch (in 3 different sizes) High quality and manufactured with Japanese precision. For punching elongated holes into leather, cardboard, rubber, etc. to e.g. pull a strap through. The punches are already very...
Content 1 piece
From €54.95 *
Corner Round Punch
Corner Round Punch
Corner Round Punch For exact rounding of corners on leather items in 9 different sizes (radii). The white line on the back of the tool makes it easier to apply to the corners to be processed. Available options: Diameter, Radius (R), A x...
Content 1 piece
From €33.00 *
Tubes for "9-in-1 Punch"
Tubes for "9-in-1 Punch"
Tubes for "9-in-1 Punch" Available in different diameters / shapes. Available options: # 01 : Round tube with 2.0 mm Ø (standard) # 02 : Round tube with 1.0 mm Ø When ordering 1 piece, you will receive 1 tube of the chosen size.
Content 1 piece
€1.95 *
Selzer Oblong Punches (up to 15 mm width)
Selzer Oblong Punches (up to 15 mm width)
Selzer Oblong Hole Punch (up to 15 mm width) For hitting elongated holes into leather, cardboard, rubber, etc. to e.g. to pull a strap through. Please use a suitable hammer (not a steel hammer) and a suitable base (work plate, cutting...
Content 1 piece
From €37.95 *
Selzer Oblong Punches (up to 50 mm width)
Selzer Oblong Punches (up to 50 mm width)
Selzer Oblong Hole Punch (up to 50 mm width) For punching elongated holes in leather, cardboard, rubber, etc. by e.g. to perform a belt. Please use a suitable hammer (not a steel hammer) and a suitable base (work plate, cutting mat) to...
Content 1 piece
From €84.95 *
Selzer Oblong Punches (up to 30 mm width)
Selzer Oblong Punches (up to 30 mm width)
Selzer Oblong Hole Punch (up to 30 mm width) For punching elongated holes in leather, cardboard, rubber, etc. by e.g. to perform a belt. Please use a suitable hammer (not a steel hammer) and a suitable base (work plate, cutting mat) to...
Content 1 piece
From €65.95 *
Selzer Oblong Punches (up to 25 mm width)
Selzer Oblong Punches (up to 25 mm width)
Selzer Oblong Hole Punch (up to 25 mm width) For punching elongated holes in leather, cardboard, rubber, etc. by e.g. to perform a belt. Please use a suitable hammer (not a steel hammer) and a suitable base (work plate, cutting mat) to...
From €55.05 *
Selzer Oblong Punches (up to 20 mm width)
Selzer Oblong Punches (up to 20 mm width)
Selzer Oblong Hole Punch (up to 20 mm width) For punching elongated holes in leather, cardboard, rubber, etc. by e.g. to perform a belt. Please use a suitable hammer (not a steel hammer) and a suitable base (work plate, cutting mat) to...
From €41.50 *
Selzer Oblong Punches (up to 10 mm width)
Selzer Oblong Punches (up to 10 mm width)
Selzer Oblong Punch (up to 10 mm width) For cutting elongated holes in leather, cardboard, rubber, etc. for e.g. pulling a strap through. Please use a suitable hammer (not a steel hammer) and a suitable base (work plate, cutting mat) to...
Content 1 piece
€39.95 *
Selzer Tubes - Complete Set (1.5 – 6.0 mm)
Selzer Tubes - Complete Set (1.5 – 6.0 mm)
Selzer Tubes - Complete Set (1.5 - 6.0 mm) Ten metric punches with diameters of 1.5 / 2.0 / 2.5 / 3.0 / 3.5 / 4.0 / 4.5 / 5.0 / 5.5 and 6.0 mm. To replace the tubes you'll need the tube changer. Suitable for the Selzer revolving punch...
Content 1 piece
€15.70 *
Replacement Punch for the Mini - Revolving Punch
Replacement Punch for the Mini - Revolving Punch
Replacement Punch for the Mini - Revolving Punch The replacement punch is easily exchanged with a slotted screwdriver.
Content 1 piece
€11.00 *
Selzer Oval – Tube (6 x 4 mm)
Selzer Oval – Tube (6 x 4 mm)
Selzer Oval Tube (6 x 4 mm) Fits the Selzer Revolving Punch and Compound Action Revolving Punch. To replace / insert the Oval Pipe, you need the Punch Changer.
Content 1 piece
€6.90 *
Selzer Revolving Punch and Eyelet Plier (4.0 – 5.0 mm)
Selzer Revolving Punch and Eyelet Plier (4.0 – 5.0 mm)
Selzer Revolving Punch and Grommet Pliers (4.0 - 5.0 mm) Three metric interchangeable punches with diameters of 4.0 / 4.5 and 5.0 mm. Three grommet setters for matching eyelets. Automatic lock, surface nickel-plated with red handles....
Content 1 piece
€26.95 *
Oval Hole Punches
Oval Hole Punches
Oval Hole punches For punching oval holes into leather. Please use a suitable base e.g. hard rubber or hardwood board and use a wooden / tooling hammer for punching. Available options: - Ø 2.5 mm : oval width 3.0 mm x oval height 1.8 mm...
Content 1 piece
From €8.95 *
Selzer Round Hole Punches Ø 1 - 10 mm
Selzer Round Hole Punches Ø 1 - 10 mm
Selzer Round Hole Punches Ø 1 - 10 mm Round hole punches in ½ mm - gradations. For punching holes in leather or similar materials. Please use a hard base and a suitable hammer (no steel hammer, risk of splintering), see accessories. When...
From €5.00 *
Selzer Tubes – Tube Changer
Selzer Tubes – Tube Changer
Selzer Tube Changer Safety screw tube changer for easy disassembly of individual tubes (Instructions attached). Fits the Selzer Revolving Punch and Compound Action - Revolving Punch. Replacement tubes (2.0 - 4.5 mm) / Extension Set -...
Content 1 piece
€5.50 *
Selzer Compound Action - Revolving Punch (2,0 - 4,5 mm)
Selzer Compound Action - Revolving Punch (2,0 - 4,5 mm)
Selzer Compound Action - Revolving Punch (2.0 - 4.5 mm) Six metric interchangeable punches with diameters of 2.0 / 2.5 / 3.0 / 3.5 / 4.0 and 4.5 mm. With viewing window for selected hole diameter. Automatic lock, surface nickel-plated...
Content 1 piece
€27.95 *
Selzer Tubes - Extension Set (1.5 – 6.0 mm)
Selzer Tubes - Extension Set (1.5 – 6.0 mm)
Selzer Tube Extension Set (1.5 - 6.0 mm) Four metric tubes in diameters of 1.5 / 5.0 / 5.5 and 6.0 mm. To replace the tubes you'll need the screw tube changer. Fits the Selzer Revolving Punch and Compound Action Revolving Punch.
Content 1 piece
€7.80 *
Selzer Tubes - Replacement Set (2.0 – 4.5 mm)
Selzer Tubes - Replacement Set (2.0 – 4.5 mm)
Selzer Tube Replacement Set (2.0 - 4.5 mm) Six metric tubes in diameters of 2.0 / 2.5 / 3.0 / 3.5 / 4.0 and 4.5 mm. To replace the tubes you'll need the screw tube changer. Fits the Selzer Revolving Punch and Compound Action Revolving...
Content 1 piece
€8.70 *
Selzer Revolving Punch (2.0 – 4.5 mm)
Selzer Revolving Punch (2.0 – 4.5 mm)
Selzer Revolving Punch (2.0 - 4.5 mm) Six metric interchangeable tubes with diameters of 2.0 / 2.5 / 3.0 / 3.5 / 4.0 and 4.5 mm. With viewing window for selected hole diameter. Automatic lock, black powder-coated surface with red...
Content 1 piece
€12.95 *
Mini Punch Set (2.0 – 5.0 mm)
Mini Punch Set (2.0 – 5.0 mm)
Mini Punch Set (2.0 - 5.0 mm) For punching small holes into leather. Pipe 6 pcs. in diameter sizes of: 2.0 mm, 2.5 mm, 3.0 mm, 3.5 mm, 4.0 mm and 5.0 mm. Please use a suitable hammer (not a steel hammer) and a suitable base (work plate,...
Content 1 piece
€9.95 *
Maxi Punch Set (4,8 - 7,8 mm)
Maxi Punch Set (4,8 - 7,8 mm)
Maxi Punch Set (4,8 - 7,8 mm) For punching large holes into leather. Tubes 6 pcs. in diameter sizes of: 4,8 mm, 5,5 mm, 6,3 mm, 6,8 mm, 7,1 mm und 7,8 mm. Please use a suitable hammer (not a steel hammer) and a suitable base (work plate,...
Content 1 set
€14.95 *
Button Hole Punch
Button Hole Punch
Button Hole Punch For punching buttonholes into leather. Ideal for use with Sam Browne studs Ø 4 mm - Ø 8 mm. Please use a suitable hammer (not a steel hammer) and a suitable base (work plate, cutting mat) to avoid damaging the tool, see...
Content 1 piece
From €19.90 *
Oblong Punches
Oblong Punches
Oblong Punches For hitting elongated holes in leather, e.g. to pull a strap through. Please use a suitable hammer (not a steel hammer) and a suitable base (work plate, cutting mat) to avoid damaging the tool, see accessories. Available...
Content 1 piece
From €25.50 *
Multi Size Strap End Punch
Multi Size Strap End Punch
Multi Size Strap End Punch For cutting even strap ends. Possible strap width: from 16 to 56 mm (universally applicable).
Content 1 piece
€39.50 *
English Point Strap End Punches
English Point Strap End Punches
English Point Strap End Punches For cutting even ends on belts and straps. Available options: - Max. width 12.5 mm - Max. width 19.0 mm - Max. width 26.0 mm - Max. width 32.0 mm - Max. width 38.0 mm - Max. width 45.0 mm When ordering 1...
Content 1 piece
From €28.00 *
Round Strap End Punches
Round Strap End Punches
Round Strap End Punches For cutting even ends on belts and straps. Available options: - Max. Width 12.5 mm - Max. Width 19.0 mm - Max. Width 26.0 mm - Max. Width 32.0 mm - Max. Width 38.0 mm - Max. Width 45.0 mm When ordering 1 piece you...
Content 1 piece
From €28.00 *
Oval Hole Punch Set (3.0 – 8.0 mm)
Oval Hole Punch Set (3.0 – 8.0 mm)
Oval Punch Set (3.0 - 8.0 mm) 7 pcs. Please use a suitable hammer (not a steel hammer) and a suitable base (work plate, cutting mat) to avoid damaging the tool, see accessories. For punching oval holes in leather. Pipe 6 pcs. in the...
Content 1 set
€39.95 *
Steel wad punch
Steel wad punch
Steel wad punch (Conical Hole Punches) Please use a suitable hammer (not a steel hammer) and a suitable base (work plate, cutting mat) to avoid damaging the tool, see accessories. Available options : - Ø 1,0 mm - Ø 2,0 mm - Ø 3,0 mm - Ø...
From €7.00 *
1 From 2
Top seller
Screw Press - Tubes Screw Press - Tubes
Content 1 piece
From €6.95 *
Craft Japan Hole Punches Ø 0.6 - 30 mm Craft Japan Hole Punches Ø 0.6 - 30 mm
Content 1 piece
From €8.10 *
Oval Hole Punches Oval Hole Punches
Content 1 piece
From €8.95 *
Round Strap End Punches Round Strap End Punches
Content 1 piece
From €28.00 *
English Point Strap End Punches English Point Strap End Punches
Content 1 piece
From €28.00 *
Tubes for Japanese Screw Punch Tubes for Japanese Screw Punch
Content 1 piece
€10.50 *
Oblong Punches Oblong Punches
Content 1 piece
From €25.50 *
Viewed
Shopbewertung - rickert-werkzeug.de
Top