Religious

Close filters
  •  
from to
  •  
  •  
No results were found for the filter!
Concho Kreuz VI
Concho Kreuz VI
Concho Steel (nickelplated) is screwed from the back (screw included). For insertion into leather up to 6 mm thick. Minimum thickness of leather 3 mm. For pre-punching we recommend a punch with Ø 5 mm. Alternatively you can use one of...
Content 1 piece
€10.15 *
Stamped Steel Concho, Cross V (antique silver)
Stamped Steel Concho, Cross V (antique silver)
Stamped Steel Concho, Cross V (antique silver) Our Conchos, stamped out of sheet steel, are fastened with the help of the round-headed rivets on the back (see picture 2). The rivet has a length of 7 mm and is suitable for insertion in...
Content 1 piece
€1.50 *
Stamped Steel Concho, Cross IV (antique silver)
Stamped Steel Concho, Cross IV (antique silver)
Stamped Steel Concho, Cross IV (antique silver) Our Conchos, stamped out of sheet steel, are fastened with the help of the round-headed rivets on the back (see picture 2). The rivet has a length of 7 mm and is suitable for insertion in...
Content 1 piece
€1.90 *
Screws and leather discs for conchos
Screws and leather discs for conchos
10 screws for conchos and 25 leather discs In case you want to fix conchos in thin leather use leather dics for distancing. Leather dics are mandatory when converting a concho into a snap button, especially when using thin leather.
€8.10 *
Concho Line 24 Snap Adapter
Concho Line 24 Snap Adapter
Use this adapter to convert any screwback conchos into a Line 24 snap button
€7.00 *
Concho Cross III
Concho Cross III
Steel - Concho aus (nickelplated), screwed from the backside (screw included). Suitable for leather from 3,0 mm to 6,0 mm. Specifications: # 01: 18,3 x 25,6 mm # 02: 18,3 x 25,6 mm # 03: 29,0 x 32,0 mm
From €3.25 *
Concho Cross II
Concho Cross II
Concho Steel (nickelplated) is riveted / screwed from the back (screw included). For insertion into leather up to 6 mm thick. Minimum thickness of leather 3 mm. For pre-punching we recommend a punch with Ø 5 mm. Alternatively you can use...
From €4.60 *
Concho Cross I
Concho Cross I
Steel - Concho (nickelplated), screwed from the backside (screw included). For leather from 3,0 mm to 7,0 mm, please use a 5,0 mm holepunch. Spezifications: # 01: Ø 12,5 mm # 02: Ø 19,0 mm # 03: Ø 25,4 mm # 04: Ø 30,0 mm
From €4.00 *
Viewed
Shopbewertung - rickert-werkzeug.de
Top