General tools

Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
5 From 5
No results were found for the filter!
English Point Strap End Punches
English Point Strap End Punches
English Point Strap End Punches For cutting even ends on belts and straps. Available options: - Max. width 12.5 mm - Max. width 19.0 mm - Max. width 26.0 mm - Max. width 32.0 mm - Max. width 38.0 mm - Max. width 45.0 mm When ordering 1...
Content 1 piece
From €54.95 *
Button Hole Punch
Button Hole Punch
Button Hole Punch For punching buttonholes into leather. Ideal for use with Sam Browne studs Ø 4 mm - Ø 8 mm. Please use a suitable hammer (not a steel hammer) and a suitable base (work plate, cutting mat) to avoid damaging the tool, see...
Content 1 piece
From €31.00 *
Lace Maker
Lace Maker
Lace Maker Cut your own leather straps, lace and cords in various widths, also suitable for chrome and vegetable tanned leather, up to 3.0 mm thickness. Comes with an English illustrated user manual. Removable blades, thus 8 sizes...
Content 1 piece
€15.50 *
Swivel Knife Set
Swivel Knife Set
Swivel Knife Set Swivel knife with height-adjustable saddle for pre-cutting the leather before tooling or for cutting patterns and images into the leather. Interchangeable blades. Also available: edge guide for the swivel knife. This set...
Content 1 set
€56.50 *
Adjustable Creaser
Adjustable Creaser
Adjustable Creaser Creaser for marking seams or making ornaments. Infinitely adjustable by an adjusting screw. Maximum distance to the leather edge 6.5 mm / creases width 1mm.
Content 1 piece
€17.95 *
Oval Hole Punch Set (3.0 – 8.0 mm)
Oval Hole Punch Set (3.0 – 8.0 mm)
Oval Punch Set (3.0 - 8.0 mm) 7 pcs. Please use a suitable hammer (not a steel hammer) and a suitable base (work plate, cutting mat) to avoid damaging the tool, see accessories. For punching oval holes in leather. Pipe 6 pcs. in the...
Content 1 set
€99.95 *
Parallelzwinge / Spannhand
Parallelzwinge / Spannhand
Parallelzwinge / Spannhand Mit Trapezgewindespindel und 2 schwenkbaren Spannblöcken. Die Spannblöcke haben jeweils 3 glatte Flächen und eine Fläche mit Kreuzprisma und sind somit zum Spannen unterschiedlichster Werkstücke universell...
Content 1 piece
From €16.55 *
Diamond Needle File flat stump 140 mm
Diamond Needle File flat stump 140 mm
Diamond Needle File flat stump 140 mm cross-section 5,5 x 1,5 mm / Diamond-covered length 70 mm / round shank Ø 3,0 mm Medium grain size for universal use.
€19.00 *
Diamond needle file semicircular shape 140 mm
Diamond needle file semicircular shape 140 mm
Diamond needle file semicircular shape 140 mm cross-section 5 x 2 mm / Diamond-covered length 70 mm / round shank Ø 3,0 mm Medium grain size for universal use.
€19.00 *
Diamond needle file square shaped 140 mm
Diamond needle file square shaped 140 mm
Diamond needle file square shaped 140 mm cross-section 3 x 3 mm / Diamond-covered length 70 mm / round shank Ø 3,0 mm Medium grain size for universal use.
€19.00 *
Diamond needle file round shaped 140 mm
Diamond needle file round shaped 140 mm
Diamond needle file round shaped 140 mm cross-section Ø 3,0 mm / Diamond-covered length 70 mm / round shank Ø 3,0 mm Medium grain size for universal use.
€19.00 *
Diamond needle file knife-shaped 140 mm
Diamond needle file knife-shaped 140 mm
Diamond needle file knife-shaped 140 mm cross-section 5 x 2 mm / Diamond-covered length 70 mm / round shank Ø 3,0 mm Medium grain size for universal use.
€19.00 *
Diamond needle file triangular shaped 140 mm
Diamond needle file triangular shaped 140 mm
Diamond needle file triangular shaped 140 mm cross-section 4 x 4 mm / Diamond-covered length 70 mm / round shank Ø 3,0 mm Medium grain size for universal use.
€19.00 *
Leather / Fabric / Utility Scissors
Leather / Fabric / Utility Scissors
Leather Scissors / Fabric Scissors / Utility Scissors Cuts leather up to approx. 2.5 mm thickness. Overall length 200 mm, weight: about 200 grams, cutting length about 100 mm.
Content 1 piece
€23.95 *
Osborne Leather Modeling Tool "Under Cut / parallel"
Osborne Leather Modeling Tool "Under Cut / parallel"
Osborne Leather Modeler Special tool for modeling leather. Right: oval, "deer foot" -shaped tip with 3.0 mm width; Left: 2 fine, angular, parallel tips, each 1.5 mm wide. - Perfect for modeling parallel strokes / borders and "lifting" a...
Content 1 piece
€29.55 *
Osborne Leather Modeling Tool "Spoon / Point"
Osborne Leather Modeling Tool "Spoon / Point"
Osborne Leather Modeler Special tool for modeling leather. Right: spoon-shaped, semicircular tip up to 4.5 mm wide (upright to 2 mm); Left: fine, round, tapered tip up to 1 mm wide. - Perfectly suitable allround modeler. Also very...
Content 1 piece
€35.00 *
Osborne Leather Modeling Tool „Deer Foot“
Osborne Leather Modeling Tool „Deer Foot“
Osborne Leather Modeling Tool „Deer Foot“ Special tool for modeling leather. Right: conical tip up to 2.5 mm wide, half-round recessed; Left: fork-shaped, spoon-shaped, tapered tip up to 1 mm wide. - Perfect for modeling leather edges....
Content 1 piece
€13.10 *
Osborne Leather Modeling Tool "Pointed Spoon / Point"
Osborne Leather Modeling Tool "Pointed Spoon / Point"
Osborne Leather - Modeler Special tool for modeling leather. Right: diamond / spoon shaped tip up to 3.5 mm wide. Left: fine, round, tapered tip up to 1 mm wide. - Perfect for modeling corners or fine lines. Also very suitable for...
Content 1 piece
€24.30 *
Osborne Replacement Blades Skiver
Osborne Replacement Blades Skiver
Osborne Replacement Blades for "The Skife" Replacement blades for skife knife. This blade is also suitable for many other tools from our range. (strap cutter, edge planer, etc.)
Content 1 piece
From €0.80 *
Steel wad punch
Steel wad punch
Steel wad punch (Conical Hole Punches) Please use a suitable hammer (not a steel hammer) and a suitable base (work plate, cutting mat) to avoid damaging the tool, see accessories. Available options : - Ø 1,0 mm - Ø 2,0 mm - Ø 3,0 mm - Ø...
Content 1 piece
From €7.95 *
Replacement Blades for Leather / Carpet Knife
Replacement Blades for Leather / Carpet Knife
Replacement Blades for Leather / Carpet / Utility Knife 10 trapezoid blades in dispenser 0.45 mm thick, ice-hardened from tool steel, suitable for our leather / carpet / utility knife PAR_64/U.
Content 10 piece (€0.28 * / 1 piece)
€2.80 *
Leather / Carpet Knife
Leather / Carpet Knife
Leather / Carpet / Utility Knife die-cast with 5-magazine. - self-reliant - Soft grip - incl. 5 blades We recommend our replacment blades (10 pcs. in dispenser) PAR # 64/N/SB.
Content 1 piece
€10.90 *
Osborne Small Hole Punch Set (2.0 – 4.8 mm)
Osborne Small Hole Punch Set (2.0 – 4.8 mm)
Osborne Small Hole Punch Set For punching small holes in leather. 7-hole tubes in diameters 2.0 mm, 2.4 mm, 2.8 mm, 3.2 mm, 4.0 mm, 4.4 mm and 4.8 mm. Please use a suitable hammer (not a steel hammer) and a suitable base (work plate,...
Content 1 set
€80.45 *
Osborne Leather Scissors
Osborne Leather Scissors
Osborne Leather Scissors Professional leather scissors. Cuts leather up to approx. 4 mm thickness. Total length 210 mm, cutting edge 74 mm.
Content 1 piece
€95.00 *
Nadelfeile flachstumpf 140 mm
Nadelfeile flachstumpf 140 mm
Nadelfeile flachstumpf 140 mm Hieb 1 (grob) oder Hieb 3 (fein). Zur Metall-, Kunststoff- und Holzbearbeitung geeignet. Für kleine Arbeiten. Zur Reinigung der Nadelfeile empfehlen wir Ihnen unsere Feilenbürste . - Abrieb im Hieb der...
€6.00 *
Nadelfeile Dreikant 140 mm
Nadelfeile Dreikant 140 mm
Nadelfeile Dreikant 140 mm Hieb 1 (grob) oder Hieb 3 (fein). Zur Metall-, Kunststoff- und Holzbearbeitung geeignet. Für kleine Arbeiten. Zur Reinigung der Nadelfeile empfehlen wir Ihnen unsere Feilenbürste . - Abrieb im Hieb der...
€6.00 *
Nadelfeile Vogelzunge 140 mm
Nadelfeile Vogelzunge 140 mm
Nadelfeile Vogelzunge 140 mm Hieb 1 (grob) oder Hieb 3 (fein). Zur Metall-, Kunststoff- und Holzbearbeitung geeignet. Für kleine Arbeiten. Zur Reinigung der Nadelfeile empfehlen wir Ihnen unsere Feilenbürste . - Abrieb im Hieb der...
€6.00 *
Nadelfeile rund 140 mm
Nadelfeile rund 140 mm
Nadelfeile rund 140 mm Hieb 1 (grob) oder Hieb 3 (fein). Zur Metall-, Kunststoff- und Holzbearbeitung geeignet. Für kleine Arbeiten. Zur Reinigung der Nadelfeile empfehlen wir Ihnen unsere Feilenbürste . - Abrieb im Hieb der Nadelfeile...
€6.00 *
Osborne Revolving Punch (2.0 – 4.8 mm)
Osborne Revolving Punch (2.0 – 4.8 mm)
Osborne Revolving Punch Six tubes in diameters of 2.0 / 2.4 / 2.8 / 3.2 / 4.0 and 4.8 mm. For hole punching of leather and similar materials.
Content 1 piece
€37.85 *
Osborne Bone Folder
Osborne Bone Folder
Osborne Bone Folder Polished, genuine cattle bone folder pasting and folding and various other applications. Dimensions: Length: 160 mm Width: 21 mm Thickness: 5 mm
Content 1 piece
€31.70 *
Nadelfeile Vierkant 140 mm
Nadelfeile Vierkant 140 mm
Nadelfeile Vierkant 140 mm Hieb 1 (grob) oder Hieb 3 (fein). Zur Metall-, Kunststoff- und Holzbearbeitung geeignet. Für kleine Arbeiten. Zur Reinigung der Nadelfeile empfehlen wir Ihnen unsere Feilenbürste . - Abrieb im Hieb der...
€6.00 *
Werkstattfeile flachstumpf 200 mm DHieb 3
Werkstattfeile flachstumpf 200 mm DHieb 3
Werkstattfeile flachstumpf 200 mm Deutscher Hieb 3. Zur Metall-, Kunststoff- und Holzbearbeitung geeignet. Feiner Hieb. Lieferung inkl. Feilenheft aus Buche mit Metallzwinge. Zur Reinigung der Feile empfehlen wir Ihnen unsere...
€6.00 *
5 From 5
Top seller
Screw Press - Tubes Screw Press - Tubes
Content 1 piece
From €8.50 *
Edge Sanding Stick Edge Sanding Stick
Content 2 piece (€1.85 * / 1 piece)
€3.70 *
Rickert - Professional Swivel Knife Rickert - Professional Swivel Knife
Content 1 piece
€28.95 *
Rickert - Ballpoint Stylus Rickert - Ballpoint Stylus
Content 1 piece
€8.95 *
Craft Japan Hole Punches Ø 0.6 - 30 mm Craft Japan Hole Punches Ø 0.6 - 30 mm
Content 1 piece
From €11.95 *
Craft Japan Blades for Swivel Knife Craft Japan Blades for Swivel Knife
Content 1 piece
From €9.50 *
Silver Pen Silver Pen
Content 1 piece
From €2.95 *
Viewed
Shopbewertung - rickert-werkzeug.de
Top