Products from IVAN

IVAN
Close filters
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
1 From 19
No results were found for the filter!
NEW
Screws for Conchos extralong
Screws for Conchos extralong
10 screws for conchos extralong - length of thread 9 mm. In case you want to fix conchos in thick leather use leather.
€3.50 *
snap-carabiner
snap-carabiner
Snap- Carabiner massive brass for straps 16 mm, 20 mm, 25 mm . Dimensions: - 16 mm (length: 63 mm, width: 31 mm, opening: 10 mm, weight: 45 g) - 20 mm (length: 63 mm, width: 35 mm, opening: 10 mm, weight: 48 g) - 25 mm (length: 66 mm,...
Content 1 piece
From €15.60 *
Strap Buckle "Wave"
Strap Buckle "Wave"
Belt buckle "Wave" Available in 2 colors (antique brass, antique silver (nickel)) and 2 different sizes. For belts with a width of 32 mm and 38 mm Available options: - 32 mm (width: 49.5 mm / length: 49.5 mm) - 38 mm (width: 58,5 mm /...
Content 1 piece
From €6.70 *
Silicone-Glue spreader
Silicone-Glue spreader
Silicone-Glue spreader Set of two kinds of Silicone-Glue spreader Features: - precise application of glue to leather, paper, felt and other materials - easy to use and clean (no solvents necessary) - reusable Please note: don`t leave the...
Content 1 Set (including 2 pieces)
€11.50 *
Silicone Gluemat
Silicone Gluemat
Silicone Gluemat / Worktopmat 28 cm x 38 cm Ideal for all kinds of glueing. Protects your worktop. Glue is easy to remove. Features: Size 28 cm x 38 cm - elastic - flexible - clean with lukewarm water and soft detergent - heatresistant -...
Content 1 piece
€13.95 *
Concho, Trout
Concho, Trout
Concho, Trout (antique silver), is screwed from the back (screw included). For insertion into leather up to 6 mm thick. Minimum thickness of leather 3 mm. For pre-punching we recommend a punch with Ø 5 mm. Alternatively you can use one...
Content 1 piece
€5.40 *
Concho, Bear
Concho, Bear
Concho, Bear (antique silver), is screwed from the back (screw included). For insertion into leather up to 6 mm thick. Minimum thickness of leather 3 mm. For pre-punching we recommend a punch with Ø 5 mm. Alternatively you can use one of...
Content 1 piece
€5.40 *
Concho, Deer
Concho, Deer
Concho, Deer (antique silver), is screwed from the back (screw included). For insertion into leather up to 6 mm thick. Minimum thickness of leather 3 mm. For pre-punching we recommend a punch with Ø 5 mm. Alternatively you can use one of...
Content 1 piece
€5.40 *
Ecken-Rundeiesen ( Corner Round Punch )
Ecken-Rundeiesen ( Corner Round Punch )
With a corner round punch you create a perfekt radius on corners with minimum effort. For good results and longliving tools use a plastic punching pad (e.g. Rickert - Punching Pad) and a non-iron hammer (e.g. plastic, wood or rawhide)....
Content 1 piece
From €18.95 *
9 mm Feet for Bag– Setting Tool
9 mm Feet for Bag– Setting Tool
Feet for Bag– Setting Tool setting tool for rivets with a cap diameter of 9 mm Consisting of a small anvil and a rivet setter. The anvil has a straight and a concave face. The rivet setter has a concave face (cone shape) and can be used...
Content 1 set
€7.95 *
Concho, Anchor
Concho, Anchor
Concho, Anchor (antique silver), is screwed from the back (screw included). For insertion into leather up to 6 mm thick. Minimum thickness of leather 3 mm. For pre-punching we recommend a punch with Ø 5 mm. Alternatively you can use one...
Content 1 piece
€7.15 *
Rivet Setter – Setting Tool
Rivet Setter – Setting Tool
Rivets Setting Tool For setting and pressing our Copper, Brass and Aluminium Rivets & Burrs. Please allow at least 2 mm excess of the shaft before riveting. Total length 115 mm.
Content 1 piece
€18.50 *
Copper, Brass and Aluminium Rivets & Burrs
Copper, Brass and Aluminium Rivets & Burrs
Copper, Brass and Aluminium Rivets & Burrs Available in 3 different materials. Can be shortened if necessary, but the shat has to be tapered again to put the burr on. We recommend our rivet setting tool for setting the rivet. Length 15...
Content 50 piece (€0.66 * / 1 piece)
From €33.20 *
Concho "Heart" (colored)
Concho "Heart" (colored)
Concho "heart" (colored) nickel-plated. Suitable for insertion in 4 - 6 mm thick leather (or similar materials). The concho is screwed from the back. Dimensions: Height: 25 mm / width: 26 mm For pre-punching we recommend a Ø 5 mm punch ....
€5.90 *
Brass Curved Shackle
Brass Curved Shackle
Brass Curved Shackle for a maximum belt width of 7 mm Dimensions: Total length: 24 mm Total width: 24 mm (with inserted split pin) Thickness: 4.3mm Split pin length: 22 mm Ring-Ø: 10.5 mm, curved shackle (Omega shackle) made of brass,
Content 1 piece
€7.20 *
Money Clip
Money Clip
Money clip (buckle clip, dollar clip) Available in 2 different versions. For holding banknotes in the wallet. The robust folding mechanism is easy to open and close, so banknotes can easily be removed or added. Selection: - Silver...
Content 1 piece
€8.30 *
Ranchero Buckle Blanks
Ranchero Buckle Blanks
Ranchero Buckle Blanks for leather inlays For belts with a width of 38 mm. Dimensions: Width: 50 mm Length: 78 mm Available colors: - Antique brass - Antique silver
Content 1 piece
€9.90 *
Ledermesser / Schärfmesser
Ledermesser / Schärfmesser
Ledermesser / Schärfmesser in traditioneller Form aus Edelstahl 440C mit hervorragender Schärfe und Schnitthaltigkeit. Besonders geeignet für dickere Leder (Blankleder, Gürtelhälse, Wasserbüffelcroupon, etc.). Die haarfein auslaufende,...
Content 1 piece
€72.00 *
Damascus Leather Knife / Paring Knife
Damascus Leather Knife / Paring Knife
Damascus Leather Knife / Paring Knife (french style) made of Damascus steel with excellent sharpness and edge retention. Especially suitable for thicker leathers (vegetable tanned leather, belt shoulders, water buffalo croupons, etc.)....
Content 1 piece
€149.00 *
Mini - Round knife
Mini - Round knife
Mini - Round knife Round knife made of stainless steel with excellent sharpness and edge retention. Especially suitable for thicker leathers (vegetable tanned leather, belt shoulders, water buffalo croupons, etc.). Can also be used for...
Content 1 piece
€84.50 *
Rapid Rivets "Vintage"
Rapid Rivets "Vintage"
Rapid Rivets "Vintage", in 3 different colors and 3 different neck lengths. For punching the holes in the leather, we recommend a revolver punch (various types available), punch set or a round hole punch (3 mm) from our range. Please use...
Content 100 piece (€0.14 * / 1 piece)
From €14.10 *
Round knife
Round knife
Round knife Round knife made of stainless steel with excellent sharpness and edge retention. Especially suitable for thicker leathers (vegetable tanned leather, belt shoulders, water buffalo croupons, etc.). Can also be used for skiving...
Content 1 piece
€139.90 *
Brass Belt Hook for straps up to 30 mm
Brass Belt Hook for straps up to 30 mm
Brass belt hook for max 30 mm wide belt incl. brass ring Suitable for fixing e.g. Leather straps or braidword on a belt / strap with a maximum width of 30 mm or directly on a waistband. Dimensions: Total length: 48.5 mm Total width: 14...
Content 1 piece
€10.60 *
Concho Kreuz VI
Concho Kreuz VI
Concho Steel (nickelplated) is screwed from the back (screw included). For insertion into leather up to 6 mm thick. Minimum thickness of leather 3 mm. For pre-punching we recommend a punch with Ø 5 mm. Alternatively you can use one of...
Content 1 piece
€10.15 *
Conco, Mjolnir (antique silver)
Conco, Mjolnir (antique silver)
Concho, Mjolnir (antique silver), is screwed from the back (screw included). For insertion into leather up to 6 mm thick. Minimum thickness of leather 3 mm. For pre-punching we recommend a punch with Ø 5 mm. Alternatively you can use one...
Content 1 piece
€8.10 *
Detail - Locheisen (Nadel)
Detail - Locheisen (Nadel)
Detail - Punch Punch - round cross-section with Ø 0.3 mm . Tool for punching very fine holes or for marking seam lines on leather. This punch works similar to an awl, no material is punched out but displaced. Please be sure to use a...
Content 1 piece
€16.20 *
Concho Biker / Skull IV
Concho Biker / Skull IV
Concho Steel (nickelplated) is riveted / screwed from the back (screw included). For insertion into leather up to 6 mm thick. Minimum thickness of leather 3 mm. For pre-punching we recommend a punch with Ø 5 mm. Alternatively you can use...
Content 1 piece
From €2.95 *
Concho, Celtic Knot 5 (antique silver)
Concho, Celtic Knot 5 (antique silver)
Concho, Cetic knot 5 (antique silver), is screwed from the back (screw included). For insertion into leather up to 6 mm thick. Minimum thickness of leather 3 mm. For pre-punching we recommend a punch with Ø 5 mm. Alternatively you can...
Content 1 piece
€7.95 *
Concho, Celtic Knot 6 (antique silver)
Concho, Celtic Knot 6 (antique silver)
Concho, Cetic knot 6 (antique silver), is screwed from the back (screw included). For insertion into leather up to 6 mm thick. Minimum thickness of leather 3 mm. For pre-punching we recommend a punch with Ø 5 mm. Alternatively you can...
Content 1 piece
€6.90 *
Detail - Locheisen (0,5 mm)
Detail - Locheisen (0,5 mm)
Detail - Punch Punch - round cross-section with Ø 0,5 mm . Tool for punching very fine holes. Due to the small wall thickness of the punch, a very precise punching is possible. Please use a suitable hammer (not a steel hammer) and a...
Content 1 piece
€15.10 *
Belt Hook for straps up to 40 mm
Belt Hook for straps up to 40 mm
Brass Belt Hook for straps up to 40 mm available in 2 different colors. Suitable for attaching e.g. leather straps or braidwork on a belt / belt with a maximum width of 40 mm or directly on a waistband. Dimensions : Total length: 48 mm...
Content 1 piece
From €8.80 *
Concho, Celtic Knot 7 (antique silver)
Concho, Celtic Knot 7 (antique silver)
Concho, Cetic knot 7 (antique silver), is screwed from the back (screw included). For insertion into leather up to 6 mm thick. Minimum thickness of leather 3 mm. For pre-punching we recommend a punch with Ø 5 mm. Alternatively you can...
Content 1 piece
€7.95 *
Spachtel für Kantenfarben
Spachtel für Kantenfarben
Spachtel für Kantenfarben aus Edelstahl, alternative Möglichkeit zum Auftragen von dickflüssigen Kantenfarben auf Lederkanten. Ausgestattet ist diese Spachten mit jeweils einem abgerundeten und einem geraden Ende. Die Spachtel kann...
Content 1 piece
€8.10 *
Concho "Hemp"
Concho "Hemp"
Concho made of steel (nickel plated) Is screwed from the back (screw included). If you want to turn your Concho into a push-button, we recommend the push-button extension. If your leather does not have the correct minimum thickness, you...
Content 1 piece
From €3.80 *
Wide Double Cap Rivets (Ø 13,2 mm)
Wide Double Cap Rivets (Ø 13,2 mm)
Wide Double Cap Rivets, in 6 different colors and 3 different neck lengths. For punching the holes in the leather, we recommend a revolver punch (various types available), punch set or a round hole punch (4 mm) from our range. Please use...
Content 20 piece (€0.98 * / 1 piece)
From €19.50 *
Domed Rivets
Domed Rivets
Domed Rivets Heavily domed rivets for decorating leatherwork in 4 different sizes und 3 different colors. Important : For the insertion of these rivets the right insertion tool is required for each size. You can find this here or under...
Content 100 piece (€0.11 * / 1 piece)
From €11.10 *
Double Cap Rivets
Double Cap Rivets
Double Cap Rivets, available in 5 different colors and neck lengths. For punching the holes in the leather, we recommend a revolver punch (various types available), punch set or a round hole punch (4 mm) from our range. Please use our...
Content 100 piece (€0.15 * / 2 piece)
From €7.50 *
Design Corners/Edges Template Stencil
Design Corners/Edges Template Stencil
Transparent, 3 mm thick acrylic template stencil for marking or cutting 9 different design corners/edges. Dimensions : Length: 160 mm Width: 110 mm Thickness: 3 mm
Content 1 piece
€26.40 *
Round Strap Ends Template Stencil
Round Strap Ends Template Stencil
Transparent, 3 mm thick acrylic stencil for marking or cutting round strap ends. Suitable for straps with the following widths: - 12.70 mm (1/2") - 15.86 mm (5/8") - 19.10 mm (3/4") - 25.40 mm (1") - 31.75 mm (1 1/4") - 38.10 mm (1 1/2")...
Content 1 piece
€15.00 *
Round Corners Template Stencil
Round Corners Template Stencil
Transparent, 3 mm thick acrylic stencil for marking or cutting round corners. Subsequent inner and outer radii are shown on the template: - 5.0 mm - 6.0 mm - 7.5 mm - 10.0 mm - 12.5 mm - 15.0 mm Dimensions : Length: 93 mm Width: 93 mm...
Content 1 piece
€13.20 *
Strap Ends Template Stencil
Strap Ends Template Stencil
Transparent, 3 mm thick acrylic stencil for marking or cutting English point and round strap ends and for marking belt holes. Suitable for belts with the following widths: - 25,40 mm (1") - 31,75 mm (1 1/4") - 38,10 mm (1 1/2") - 44.45...
Content 1 piece
€28.20 *
Stamp Set "Acronyms"
Stamp Set "Acronyms"
Stamp Set "Acronyms" Set of 13 pcs. with one changeable handle - Height: 6.4 mm (1/4") For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed....
Content 1 set
€46.95 *
English Point Strap Ends Template Stencil
English Point Strap Ends Template Stencil
Transparent, 3 mm thick acrylic stencil for marking or cutting of English point strap ends. Suitable for straps with the following widths: - 12.70 mm (1/2") - 15.86 mm (5/8") - 19.10 mm (3/4") - 25.40 mm (1") - 31.75 mm (1 1/4") - 38.10...
Content 1 piece
€18.40 *
Stamping tool K135 ( E-17 )
Stamping tool K135 ( E-17 )
Stamping tool K135 ( E-17 ) / 16 x 16 mm For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not,...
Content 1 piece
€7.95 *
Stamping tool K136 ( G-12 )
Stamping tool K136 ( G-12 )
Stamping tool K136 ( G-12 ) / Ø 16 mm For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we...
Content 1 piece
€7.95 *
Stamping tool K137 ( C-11 )
Stamping tool K137 ( C-11 )
Stamping tool K137 ( C-11 ) / 16 x 16 mm For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not,...
Content 1 piece
€7.95 *
Stamping tool K139 ( D I-19 )
Stamping tool K139 ( D I-19 )
Stamping tool K139 ( D I-19 ) / 16 x 16 mm For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not,...
Content 1 piece
€7.95 *
Stamping tool K140 ( D IV-19 )
Stamping tool K140 ( D IV-19 )
Stamping tool K140 ( D IV-19 ) / 11 x 11 mm For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or...
Content 1 piece
€7.95 *
1 From 19
Viewed
Shopbewertung - rickert-werkzeug.de
Top